Types of Coatings

These aqueous mineral suspensions with a high photocatalyst content have been optimized for maximum efficiency and safety. They serve mainly as coatings to create multifunctional protective surfaces which, with the help of light energy, actively and for a long time: 

• cleans its surface and surrounding air from dangerous pollutants and allergens
• cleans itself and prevents dirt from settling
• prevents the deposition of microorganisms (viruses, bacteria, fungi, algae, yeasts and fungi)
• protects the substrate on which they are applied from the destructive effects of ultraviolet radiation, which is contained in sunlight

To ensure full functionality in interiors, it is necessary to ensure the access of ultraviolet radiation with a minimum intensity of 0.2W / m ²  to the created FN NANO^® surface.

We recommend it for white and light pastel shades, which will keep it clean for a long time and will significantly reduce the heat load of buildings and urban agglomerations.

The coatings do not contain any VOCs or organic substances and do not release anything into the environment. 

We have developed a special FN NANO^® Aqua suspension for water purification . It is a liquid preparation that is added to pool water and natural ponds. It is designed to reduce the consumption of pool chemicals while maintaining good quality and crystal clear appearance of the water in the pool.

FN NANO®1

• Protective photocatalytic coating for permanently clean facades, walls,
  concrete structures and other surfaces. Extends the life of the facade
• Extraordinary suitable for insulated facades. Ensures active self-cleaning of the surface
• from dirt and color fastness. It protects against micro-organism build-up (greening and blackening of the surface).
• It forms an effective protection against UV radiation
• Guarantee of functionality on vertical surfaces – 10 years^[1]

PRODUCT DESCRIPTION:

The FN NANO®1 functional coating has been developed and certified specifically for the protection of concrete to which the coating layer is bonded. It is designed to be used primarily in exterior applications. It can also be applied to raw masonry surfaces, plasters, acrylic and silicate paints and common building materials that do not repel water. It works on the basis of a physical phenomenon called photocatalysis. The coating is activated by the ultraviolet component found in daylight and has highly effective protective and self-cleaning properties. Its protective and self-cleaning properties are many times superior to chemical products in their long-term effectiveness. High breathability and vapor permeability.

PHOTOCATALYSIS PROVIDES:

• Protection against dirt, mold, moss, and spider webs
• Protection of facades from UV radiation
• Protection of concrete, masonry, acrylic and mineral substrates
• Cleaning of pollutants and harmful substances from the air

APPEARANCE OF THE COATING:

The coating is semi-transparent with a white hue. Transparency approx. 60-65 %. For facades can be colored in pastel shades. The thickness of the coating layer is optimally 5-20 microns. The layer is active immediately after daylight (exterior) or artificial light with a UVA spectrum (interior). The maximum coating efficiency is achieved at light wavelength of 365 nm. The coating is mature after 24 hours and fully functional after the first rain or water rinse.

FN NANO®2

• Protective photocatalytic coating for effective air cleaning and for permanently white and clean facades, walls, concrete and other surfaces
• Photocatalysis ensures active self‑cleaning of the surface from dirt and protects surfaces against the build-up of microorganisms
• It forms an effective protection against UV radiation and cools surfaces. It can used indoors as an effective air purifier
• Guarantee of functionality on vertical surfaces – up to 15 years

PRODUCT DESCRIPTION:

The FN NANO®2 functional coating has been developed and optimized for air cleaning and anti-microbial functions. FN NANO® 2 is inert and contains no organic substances. It does not release any harmful substances into the environment. It is designed for both exterior and interior use. It works on the basis of a physical phenomenon called photocatalysis. The coating is activated by the ultraviolet component contained in daylight and has highly effective protective and self-cleaning properties. Unlike chemical products, its properties are inexhaustible. It guarantees extremely effective protection of the substrate and is often used as an effective technology to reduce the risk of airborne disease transmission in interiors.

PHOTOCATALYSIS PROVIDES:

• Purification of the air from airborne viruses, bacteria, allergens
• Lower transmission of airborne infectious diseases and reduced asthma risks
• Removal of odors and reduced the occurrence of oily dirt
• High effectiveness against molds, fungi, algae and other microorganisms
• Environmentally friendly solution without chemicals, purely physical effect
• Effective self-cleaning protection for white facades
• Maximum UV protection – prevents material degradation

APPEARANCE OF THE COATING:

The coating is semi-transparent with white color and its surface is slightly chalky. Transparency approx. 50 %. It is suitable for all porous surfaces where we want to achieve a beautiful and clean appearance for as long as possible, without it being attacked by algae, mold, fungi and other microorganisms. The thickness of the coating layer is optimally 5-30 microns. The layer is active immediately after the impact of the ultraviolet component contained in daylight (exterior) or artificial light with a share of the UVA spectrum (interior). The maximum efficiency of the coating is achieved at light wavelength of 365 nm. The coating is cured after 24 hours.

FN NANO®3

• Interior low-cost and noiseless “air purifier”
• A photocatalytic coating specially developed to create surfaces with maximum air purification efficiency and to protect against the build-up of microorganisms
• The created self-cleaning surface performs the function of air purification with long-term efficiency
• Guarantee of functionality in the interior – 15 years

PRODUCT DESCRIPTION:

This is a special ceiling coating whose protective functions are based on the use of the physical phenomenon of photocatalysis and on other physical properties of the materials it contains.  The functionality of the coating is virtually inexhaustible, unlike chemical products. FN NANO®3 functional coating is an aqueous suspension of patent-protected mineral substances with a high content of photoactive titanium dioxide (TiO₂). The high TiO₂ content and the optimized mineral binder in the coating layer guarantee extremely effective protection of the substrate. It is also designed for the harsh conditions of medical and industrial production. It serves to create the upper mineral active photocatalytic layer providing the function of air purification and reduction of viruses and microorganisms. It is used primarily indoors as a composition for ceilings. It is used as a highly efficient low-cost technology for cleaning air from a wide range of pollutants and odors. It creates a functional layer on the ceiling and walls, which, in addition to cleaning the air, effectively prevents the deposition of microorganisms. The product will be appreciated especially by those who have various allergies, asthma, etc., to whom this coating will help create a healthier and cleaner environment where there are more people (shopping malls, airport halls, office buildings…), as well as at home, in school facilities. .It is supplied in basic white form and cannot be colored.

PHOTOCATALYSIS PROVIDES:

• Cleaning of odors, allergens, VOCs, viruses and bacteria from the air
• High effectiveness against mold and micro-organisms
• Lower transmission of airborne infectious diseases and reduced risk of asthma
• Ecological solution without chemical action, purely physical effect

APPEARANCE OF THE COATING:

FN NANO®3 is white and has a relatively high opacity. Transparency is about 30-40 %. The thickness of the coating layer is optimally 10-40 microns. The layer formed is white and relatively soft, so we recommend applying the coating on the ceiling and surfaces where there is no risk of abrasion damage. The coating is white in color and is suitable for all common types of plaster and brick or plasterboard substrates The layer is active immediately after the impact of the ultraviolet component contained in daylight or artificial light with a proportion of the UVA spectrum. The maximum efficiency of the coating is achieved by light wavelength of 365 nm. The coating is mature after 24 hours.

FN NANO® Transparent

• Protective photocatalytic coating specially developed for long-term protection of concrete limestone, sandstone, travertine and similar natural and artificial stones with porous structure
• Due to its breathability and vapor permeability, the substrate does not freeze in winter.
• The coating layer is highly transparent
• The resulting self-cleaning surface forms a perfect protective shield against UV radiation, microbiological attack and airborne dirt deposits
• Guarantee of functionality on vertical surfaces – 10 years

PRODUCT DESCRIPTION:

This is a special, highly effective functional mineral coating for surface protection that works on the basis of a purely physical phenomenon called photocatalysis. FN NANO® Transparent is activated by daylight and has highly effective protective and self-cleaning properties. It effectively and long term protects surfaces against dirt deposits (soot and dust particles), microorganisms (mold, algae) and UV degradation. Unlike chemical products, its protective and self-cleaning properties are inexhaustible. High breathability and vapor permeability – the coating does crack when frozen in winter.

PHOTOCATALYSIS PROVIDES:

• High effectiveness against molds, algae, fungi and other microorganisms
• Maximum protection against UV radiation and degradation of materials
• Strong self-cleaning function – protects the surface for a long time and maintains a clean appearance
• Cleaning of pollutants, allergens, and odors from the air

APPEARANCE OF THE COATING:

FN NANO® Transparent is semi-transparent with slight white hue and suitable for all porous surfaces where we want to acknowledge the specific texture of the substrate and achieve a beautiful and clean appearance for as long as possible, without being attacked by algae, mold, fungi and other microorganisms. Created layer is 80 % transparent, initially with a slightly whitish hue (creates a slightly matte wax-like film), which disappears over time. The thickness of the coating layer is optimally 5-20 microns. The coating is active immediately after exposure to the ultraviolet component contained in daylight (exterior) or artificial light with a UVA spectrum (interior). The maximum efficiency of the coating is achieved by light wavelength of 365 nm. The coating is cured after 24 hours and fully functional after the first rain or water rinse.

FN NANO® BioMax

• Biocidal photocatalytic coating
• with antimicrobial function for effective air purification with long-lasting effect.
• Preventing the spread of diseases – a healthier and safer indoor environment in healthcare facilities.
• For the removal of viruses, bacteria, spores, mold, allergens, organic vapors and odors.
• Guarantee of functionality up to 7 years

PRODUCT DESCRIPTION:

The multifunctional biocidal coating FN NANO® BioMax for indoor wall surface protection has been developed to maximize its antimicrobial function and enable its use as an effective biocidal agent with a long-lasting effect ²⁴_/7 in healthcare facilities, chronic disease hospitals, nursing homes and households and other places to improve protection against the spread of infections. FN NANO® BioMax is a titanium dioxide-based composite antibacterial protective coating with an effective biocidal agent and a very strong photocatalytic effect. It is designed for professional use. The antibacterial effect of the active biocidal agent is enhanced by the photocatalytic effect, which is activated with light with a UVA spectrum. It is supplied in the basic “hospital shade” – with a slight tint of yellow.

FEATURES:

• Effectively kills viruses, bacteria, fungi and spores including MRSA (Methicillin-resistant Staphylococcus aureus)
• Significantly reduces the risk of transmission of airborne infectious diseases and infections, including nosocomial infections
• Prevents the build-up of viruses and bacteria on the walls
• Effective prevention of mustiness, odors and mold
• Removes molecules of allergens and toxic substances. Works ²⁴_/7 using photocatalytic and biocidal effect – cleans the air from microorganisms and organic pollutants
• Works as a noiseless, maintenance-free, trouble-free, economical and highly efficient air purifier
• Very suitable for allergy and asthma sufferers
• High breathability and vapor permeability

APPEARANCE OF THE COATING:

FN NANO® BioMax is semi-transparent with a slight yellow tint and is suitable for all common types of masonry, plasterboards and plaster substrates. The coating thickness is optimally 5-20 microns. It is certified as concrete protection. Do not use on clay glued substrate!

The layer is active immediately after the impact of the ultraviolet component contained in daylight or artificial light with a proportion of the UVA spectrum. The maximum efficiency of the coating is achieved at a light wavelength of 365 nm. The coating is mature after 24 hours.

It maintains high efficiency for a long time with a guarantee of 5 or 7 years – according to Decree No. 306/2012 Coll.

FN NANO®Wood

• Protective photocatalytic coating for a permanently fresh wood appearance with extremely long-lasting protection against greying and blackening and degradation.
• Prevents the build-up of mold, fungi, and other micro-organisms.
• High vapor permeability and breathability. The coating does not peel, does not crack, and breathes.
• Super strong self-cleaning effect prolongs the protection of the wood and its beautiful healthy appearance.

PRODUCT DESCRIPTION:

FN NANO®Wood is a very effective functional mineral coating for wood protection, which works on the basis of a physical phenomenon called photocatalysis. The coating is activated by the ultraviolet component found in daylight and has highly effective protective and self-cleaning properties. Unlike chemical products, its protective properties against wood degradation and blackening due to UV radiation and micro-organisms are harmless and inexhaustible. It guarantees extremely effective protection of wood.

PHOTOCATALYSIS PROVIDES:

• Long-lasting preservation of wood structures, fences, and wood cladding
• High effectiveness against molds, fungi, and other microorganisms
• Maximal protection against UV degradation
• Keeps the wood looking fresh for a long time

APPEARANCE OF THE COATING:

FN NANO® Wood is suitable for wood surfaces where we want to preserve as much of the original look and texture as possible. It is available in a basic semi-transparent form. It can also be colored for interiors. The thickness of the coating layer is optimally 5-20 microns. The resulting layer is semi-transparent, with whitish hue. The layer is active immediately after exposure to daylight (exterior) or artificial light with UVA spectrum (interior). The maximum coating efficiency is achieved by light wavelength of 365 nm. The coating is fully functional after 24 hours of dry curing. To maintain long-term functionality during curing, it must not be exposed to rain or water.

FN NANO®Aqua

• Pool water additive to reduce chemical consumption during pool maintenance. Gentle to human skin, suitable for allergy sufferers.
• Specially formulated to prevent the growth of green algae, bacteria, and fungi.
• Actively eliminates toxins, grease, and
• Works at any pH even in saltwater.
• Also suitable for garden ponds with fish
• An ecological solution without chemistry – a purely physical effect.

PRODUCT DESCRIPTION:

It is a special aqueous suspension of inert minerals to reduce the consumption of chemical products in pool and pond water maintenance. The substances contained in the suspension, through the physical phenomenon of photocatalysis, effectively prevent the overgrowth of undesirable microorganisms in the water. It is a patent-protected formulation with mineral binders and a high content of photoactive titanium dioxide (TiO₂). In terms of current legislation, it cannot be used for public swimming pools and pools without perfect and regular maintenance.

PHOTOCATALYSIS PROVIDES:

• Minimizes the use of pool chemicals
• Non-chemical care of swimming pools and garden fish ponds
• Prevention of the growth of green algae, cyanobacteria, and fungi
• Active elimination of toxins, grease, and organic dirt from water
• An ecological solution, with purely physical effect – gentle to skin, suitable for allergy sufferers
• Functionality at any pH, even in salty water

APPEARANCE:

FNA is a white aqueous suspension containing mineral components with a tendency to sediment. This sedimentation is not detrimental to the functionality of the product.